The least exotic of the four and the oldest process is the plain and simple oxy fuel cutting process. The traditional oxy fuel torch is replaced by a mechanized torch with the gas flow and valves controlled by the CNC. This torch is mounted on the similar 2½ axes system. This is still used extensively for cutting very thick metal substrates which cannot be cut with plasma or laser economically. Torch Height Control from IHT Germany

MSX 750 CAP
The cost effective MSX 750 CAP system features a touchless, precise and fast clearance control for oxy fuel cutting machines achieving high quality dry cuts. It consists of the LINEAR DRIVE 2220 with a built-in capacitive sensor system and a motor controller. Ring electrodes measure the clearance to metallic work piece.

General Information
Advantages

• Adapts to most cutting machines
• Precise and touchless clearance control of torch
• Small ring electrodes offer maximum utilisation of work piece
• High precision of clearance control (±0.3 mm) features precise cuts
• Remote control of clearance setting and pierce height

Features

• High precision torch lifter, stroke 220 mm
• High speed for control up to 80 mm/s
• Load up to 12 kg
• Torch clamp for torch diameter 30–35 mm
• Hose clamp
• Vertical collision protection, automatic upwards movement protects the torch
• Additional collision protection if ring electrode touches the work piece, automatic upwards movement protects the torch
• Dust-proof and maintenance-free torch lifter
• Integrated monitoring of power supply (24 V DC), sensor system, overload and collision

Coatec India supplies Oxy Fuel Cutting equipment as per the requirements of the customer.